PRODUCT OVERVIEW :

The IC-800-T pack's proven materials and Tractrix® horn technology into a high performance, install friendly, UL-2043 & 1480 certified loudspeaker with an integrated back can. For distributed applications, the IC-800-T features a 70/100 volt, 100 watts, multi-tap transformer. A single rotary switch for the 8-ohm bypass and multi-tap settings is conveniently located under the speaker grille.

The two-way IC-800-T features an 8-inch woofer and 1-inch titanium diaphragm compression driver on a 3.5-inch Tractrix Horn for smooth response and exceptional off-axis performance. The Tractrix port design helps provide deeper, extended bass with less distortion. The low insertion loss 100-watt transformer means you’ll be able to achieve higher output levels with less compression due to transformer saturation.

The IC-800 T is shipped complete with a tile-bridge for installation in a suspended ceiling or wherever additional reinforcement of the ceiling material is required.

FEATURES :

• Tight 75-degree coverage pattern for high ceiling applications
• 100 watts, low insertion loss, multitap transformer for high output and less compression
• 70-volt, 100-volt or low impedance operation selectable via a front baffle switch
• Tractrix port design for deep bass with improved linear response
• Excellent low-frequency performance for applications where a low-frequency bass extension is required
• Designed to mix & match with Klipsch CA-T speakers

APPLICATIONS :

• Boardrooms & Offices
• Airports, Convention Centers, Hotels
• Reception / Waiting Rooms
• Retail Outlets / Shopping Malls
• Lounges / Cruise Ships / Bars
• Business Music Systems

SPECIFICATIONS :

FREQUENCY RESPONSE1 (+/- 4 dB) : 49 Hz - 20 kHz
POWER HANDLING2 : 100 watts (22V) 400 watts peak
MAXIMUM SPL3 : 111 dB Continuous, 117 dB Peak
SENSITIVITY4 : 92 dB
COVERAGE ANGLE : 75º
DIRECTIVITY INDEX (DI) : 8 dB
DIRECTIVITY FACTOR (Q) : 6.3
NOMINAL IMPEDANCE
(IN 8 OHM BYPASS MODE) : 6.5 ohms, 4.2-ohm minimum
COMPONENTS : One 8" (20.32cm) woofer 1” (2.54cm) Titanium diaphragm compression driver
INPUT CONNECTION : Terminal Strip
TAP SETTINGS : 70V: 100w, 50w, 25w, 12.5w, 100V: 100w, 50w, 25w
ENCLOSURE TYPE : Bass-reflex via Tractrix port
SAFETY AGENCY RATING : UL-1480, UL-2043
WIRE GAUGE ACCOMMODATED : 14 AWG
CUTOUT DIMENSIONS : 12.625” (32.1cm) diameter
MOUNTING DEPTH : 12.75” (32.4cm)
OVERALL DEPTH : 13.125” (33.3cm)
OVERALL WIDTH : 14.15” (35.9cm) diameter
THRU HOLE WIDTH : 12.5” (31.75cm)
WEIGHT : 21 lbs. (9.5kg)
FINISHES : White/Paintable
ACCESSORIES : Mud Ring Kit (PN: 061347)